Anyway, I found a fairly detailed presentation in which they were using Gaussian 98 here: https://www.uow.edu.au/~adamt/Trevitt_Research/Links_files/pKa%20workshop%20slides.pdf
While that should be ok to reproduce, it's not that straightforward to do even with Gaussian, since G09 and G03 don't report solvation parameters in the same way (or detail) as G98.
I'm also a lot keener on NWChem than Gaussian for various reasons, not least that it's 'free' (both libre and gratis) while Gaussian inc. has been accused of doing somewhat unfriendly things in the name of protecting their business interests.
See here and here for an example, and then here for a rebuttal from Gaussian inc. I know that EMSL/Pacific Northwest National Lab that develop NWChem and ECCE are prohibited from using Gaussian since they are considered as being competitors.
Back to science.
Our test example will be acetate, and we'll use formic acid to correct our results.
The fact that this post is very long is due to the amount of detail supplied -- I prefer to show some of the more obvious things so that people can learn from what I post -- and I learn by writing the post.
But first let's just do everything using direct methods.
We work with a thermochemical cycle:
IF we can't calculate the DG_solution directly (i.e. too expensive) we can optimise our structures in the gas phase, and then calculate the solvation energy for those structures.Then DG_sol=DG_gas+DG_solvation(B)-DGsolvation(A).
(more generally sum of DG_solv(prod) - sum of DG_solv(reactants)).
1. pKa of Acetic acid using direct methods
We can either do
H3CCOOH -> H3COO- + H+
or
H3CCOOH + H2O -> H3COO- + H3O+
Steps:
Optimise acetic acid and acetate in the gas phase and do frequency calculations to get the enthalpy and entropy. Then use the gas phase structures and do single point calculations using COSMO to get the electrostatic solvation energies. Finally, use standard state corrections.
A. Optimise acetic acid in the gas phase and do frequency calculation
Title "aceticacid_gas"Start aceticacid_gasechocharge 0geometry autosym units angstrom C 0.0402340 0.0308110 0.0402340 H -0.600803 -0.611482 0.679201 H 0.679201 -0.611482 -0.600803 H -0.607055 0.659335 -0.607055 C 0.903928 0.890481 0.903928 O 0.814831 2.23989 0.814831 O 1.78275 0.299052 1.78275 H 2.25438 1.03276 2.25438endbasis "ao basis" spherical print H library "6-31++G**" O library "6-31++G**" C library "6-31++G**"ENDdft mult 1 direct noio XC b3lyp grid fine mullikenenddriver defaultendtask dft optimizetask dft freq
which gives
Total DFT energy = -229.102415550663 One electron energy = -550.833155571059 Coulomb energy = 230.555870626149 Exchange-Corr. energy = -29.497734561879 Nuclear repulsion energy = 120.672603956126 Numeric. integr. density = 31.999999816803 Total iterative time = 3.6sandTemperature = 298.15K frequency scaling parameter = 1.0000 Zero-Point correction to Energy = 38.683 kcal/mol ( 0.061646 au) Thermal correction to Energy = 41.568 kcal/mol ( 0.066243 au) Thermal correction to Enthalpy = 42.160 kcal/mol ( 0.067186 au) Total Entropy = 69.198 cal/mol-K - Translational = 38.179 cal/mol-K (mol. weight = 60.0211) - Rotational = 23.855 cal/mol-K (symmetry # = 1) - Vibrational = 7.164 cal/mol-K Cv (constant volume heat capacity) = 14.327 cal/mol-K - Translational = 2.979 cal/mol-K - Rotational = 2.979 cal/mol-K - Vibrational = 8.368 cal/mol-K
So that G=-229.102415550663*(627.503 kcal/Hartree)+(42.160 kcal/mol-298.15*(69.198 cal/molK)/1000)=-1.4372e+05 kcal/mol
B. Optimise acetate in the gas phase and do frequency calculation
Title "acetate_gas"Start acetate_gasechocharge -1geometry autosym units angstrom C 0.0405721 0.0285481 0.0405721 H -0.601438 -0.613690 0.678620 H 0.678620 -0.613690 -0.601438 H -0.605857 0.658809 -0.605857 C 0.904975 0.886806 0.904975 O 0.825186 2.23364 0.825186 O 1.77103 0.316179 1.77103endbasis "ao basis" spherical print H library "6-31++G**" O library "6-31++G**" C library "6-31++G**"ENDdft mult 1 direct noio XC b3lyp grid fine mulliken enddriver defaultendtask dft optimizetask dft freq
which gives
Total DFT energy = -228.540046314754 One electron energy = -539.474204198295 Coulomb energy = 229.063209931484 Exchange-Corr. energy = -29.339040486703 Nuclear repulsion energy = 111.209988438759 Numeric. integr. density = 32.000000595562 Total iterative time = 2.9sand
Temperature = 298.15K frequency scaling parameter = 1.0000 Zero-Point correction to Energy = 30.023 kcal/mol ( 0.047845 au) Thermal correction to Energy = 32.271 kcal/mol ( 0.051427 au) Thermal correction to Enthalpy = 32.863 kcal/mol ( 0.052371 au) Total Entropy = 64.022 cal/mol-K - Translational = 38.129 cal/mol-K (mol. weight = 59.0133) - Rotational = 23.766 cal/mol-K (symmetry # = 1) - Vibrational = 2.127 cal/mol-K Cv (constant volume heat capacity) = 11.112 cal/mol-K - Translational = 2.979 cal/mol-K - Rotational = 2.979 cal/mol-K - Vibrational = 5.153 cal/mol-Kso that G=-228.540046314754*(627.503 kcal/Hartree)+(32.271 kcal/mol-298.15*(64.022 cal/molK)/1000)=-1.4338e+05 kcal/mol
Putting A and B together:(-228.540046314754*(627.503)+(32.271-298.15*(64.022/1000)))-(-229.102415550663*(627.503)+(42.160-298.15*(69.198/1000)))=344.54 kcal/mol
We haven't accounted for solvation or the proton yet.
C. Solvation of acetic acid
Title "aceticacid_solvation"Start aceticacid_solvationechocharge 0geometry autosym units angstrom C -0.313400 -1.37257 0.00000 H -0.932151 -1.56367 -0.882188 H -0.932151 -1.56367 0.882188 H 0.551887 -2.03461 0.00000 C 0.149260 0.0607660 0.00000 O 1.30165 0.439500 0.00000 O -0.897630 0.927778 0.00000 H -0.523912 1.82535 0.00000endbasis "ao basis" spherical print H library "6-31++G**" O library "6-31++G**" C library "6-31++G**"ENDdft mult 1 direct noio XC b3lyp grid fine mullikenendcosmoendtask dft energy
which gives
COSMO solvation results ----------------------- gas phase energy = -229.1024156124 sol phase energy = -229.1172649438 (electrostatic) solvation energy = 0.0148493315 ( 9.32 kcal/mol)D. Solvation of acetate
Title "acetate_solvation"Start acetate_solvationechocharge -1geometry autosym units angstrom C -0.0308736 -1.36399 0.00000 H 0.503418 -1.74042 0.882388 H 0.503418 -1.74042 -0.882388 H -1.05531 -1.75261 0.00000 C -0.00485953 0.199667 0.00000 O -1.12642 0.778065 0.00000 O 1.14855 0.713544 0.00000endbasis "ao basis" spherical print H library "6-31++G**" O library "6-31++G**" C library "6-31++G**"ENDdft mult 1 direct noio XC b3lyp grid fine mullikenendcosmoendtask dft energy
which gives
COSMO solvation results ----------------------- gas phase energy = -228.5400463128 sol phase energy = -228.6567490452 (electrostatic) solvation energy = 0.1167027324 ( 73.23 kcal/mol)Putting A, B and solvation energiestogether:
[(-228.540046314754*(627.503)+(32.271-298.15*(64.022/1000)))-(-229.102415550663*(627.503)+(42.160-298.15*(69.198/1000)))]-[73.23-9.32]=344.54-63.910=280.63 kcal/mol
E. The Proton
If you try to do any calculations on an isolated proton you get and SCFE of zero, and you won't do much better in terms of thermochemical data. Yet, monoatomic gases obviously still posses entropy and enthalpy. Instead, the document I cite above uses the ideal gas partition function for ideal monoatomic gases which gives a value of 6.28 kcal/mol for the free energy of a proton. The last reference states that the free energy for a proton in the gas phase is experimentally determined to be -6.28 kcal/mol and that the free energy of hydration is -264.61 kcal/mol (experimental).
[(-228.540046314754*(627.503)+(32.271-298.15*(64.022/1000)))-6.28-(-229.102415550663*(627.503)+(42.160-298.15*(69.198/1000)))]-[73.23+264.61-9.32]=338.26-328.52=9.74 kcal/mol =40.752 kJ/mol
We're not done yet though -- make sure to continue to 'F. Standard States'
F. Standard States
We know that
DG=DG^0+RT ln (Q).
We have a bit of a problem. We're doing calculations in the gas phase (pressure) but looking at predicting solution values (concentration). Also, I don't fully get it yet, so my explanation is probably a bit fuzzy.
So if A+B-> C+D we get Q=(C*D)/(A*B) but for A -> C+D we get Q=(C*D)/(A) or (1 bar x1 bar/1 bar)= 1 bar = 101350 Pa => nRT/P=1*8.314*298.15/101350=0.024458 m3= 24.46 L. The concentration of each species is 1 mol/bar which in volume terms means 1/24.46 L.
And the A -> C + D situation is what we have if we look at
HA -> H+ + A-
So,
Q=((1/24.46)*(1/24.46)/(1/24.46))=1/2.4.46 which gives
DG=DG^0-RTln(24.46)=DG^0-7924.9 J/mol
Thus, we need to correct for the standard state: 40.752 -7924.9/1000=32.827 kJ/mol
G. Calculating pKa
Since (in solution so that concentrations are 1 M)
DG=DG^0+RTln(K), where K=([H3COO][H+])/([H3COOH])
DG=DG^0+(RT ln([HCOO]/[H3COOH])+RTln (10^(-pH)), where RT ln([HCOO]/[H3COOH])=RTln(1/1)=0 so
DG=DG^0+RTln (10^(-pH))=DG^0+RT log (10^(-pH)/log(e)=DG^0-(RT/log(e)) * pH
Which for equilbrium, where pH=pKa and DG=0, turns into
pKa=DG^0*log(e)/RT
pKa= DG*log(e)/(RT)=(32.827*1000)*log(e)/(8.314*298.15)=5.75
Not that great as predictions go (exp: pKa=4.75). Looking at some of the literature one error lies in the size of the solvation energies. Possibly one should tune the parameters used in the COSMO.
2. Isodemic reaction/correction
Using formic acid
This approach is based on 1) the similarity between two compounds and 2) us knowing the DG_solution parameter for one of them.
Assuming that we know that formic acid has a pKa of 3.75, then DG_solution=pKa*RT/log(e)=3.75*8.314*298.15/log10(e)/1000=21.404 kJ/mol. The reverse reaction is -21.404 kJ/mol.
We skip a few steps.
Here are the calculated parameters for formic acid (using the same method as above):
Formic acid
SCFE: -189.772804709496 Hartree
Enthalpy correction: 23.773 kcal/mol
Entropy correction: 59.339 cal/mol
Solvation energy: 9.99 kcal/mol
Formate
SCFE: -189.217943605798 Hartree
Enthalpy correction: 15.016 kcal/mol
Entropy correction: 56.992 cal/mol
Solvation energy: 72.47 kcal/mol
[Just for kicks we quickly look at what the prediction is:
accounting for everything (solvation, proton etc.)
((-189.217943605798*627.503+(15.016-298.15*56.992/1000)-72.47) +(-6.28-264.61))-(-189.772804709496*627.503+(23.773-298.15*59.339/1000)-9.99)=6.7498 kcal/mol
6.7498*4.184-7924.9/1000=20.316 kJ/mol <=> pKa=1000*20.316*log10(e)/(8.314*298.15)=3.56]
The isodesmic approach:
Here we look at
H3CCOOH + -OOCH -> H3CCOO- +HOOCH
This combined reaction has a
DG_solution=DG_solution(acetic acid/acetate)+DG_solution(formate/formic acid)
<=>
DG_solution(acetic acid/acetate)= DG_solution-DG_solution(formic acid/formate)
=DG_solution-(-21.404 kJ/mol)
=DG_gas+[DG_sol(acetate)+DG_sol(formic acid)-DG_sol(acetic acid)-DG_sol(formate)]+21.404 kJ/mol
=
(-228.540046314754*(627.503)+(32.271-298.15*(64.022/1000)))+(-189.772804709496*627.503+(23.773-298.15*(59.339/1000)))-(-229.102415550663*(627.503)+(42.160-298.15*(69.198/1000)))-(-189.217943605798*627.503+(15.016-298.15*(56.992/1000)))+(-73.23-9.99+9.32+72.47)+5.116 kcal/mol= 8.11 kcal/mol= 33.93 kJ/mol
Here we don't need to fiddle with standard states or experimental values for solvation of the proton.
pKa= DG*log(e)/(RT)=(33.93*1000)*log(e)/(8.314*298.15)=5.94
which is even worse than before...
We want ca 27 kJ/mol = 6.48 kcal/mol. Paradoxically this may be due to the ab initio approach to the pKa of formic acid actually giving a very reasonable value.
Using Propanoic acid
So let's try the isodesmic approach using propanoic acid as our reference instead.
Propanoic acid
SCFE: -268.419515785389 Hartree
Enthalpy correction: 60.894 kcal/mol
Entropy correction: 75.184 cal/mol
Solvation energy: 8.15 kcal/mol
Propanoate
SCFE: -267.857478200414 Hartree
Enthalpy correction: 52.096 kcal/mol
Entropy correction: 75.392 cal/mol
Solvation energy: 72.14 kcal/mol
pKa=4.86 <=> 27.739 kJ/mol= 6.63 kcal/mol
(-228.540046314754*(627.503)+(32.271-298.15*(64.022/1000)))+(-268.419515785389*627.503+(60.894-298.15*(75.184/1000)))-(-229.102415550663*(627.503)+(42.160-298.15*(69.198/1000)))-(-267.857478200414*627.503+(52.096-298.15*(75.392/1000)))+(-73.23-8.15+9.32+72.14)+6.63 kcal/mol=7.4324 kcal/mol=31.097
pKa= DG*log(e)/(RT)=(31.097*1000)*log(e)/(8.314*298.15)=5.45
It's a bit better, but still a bit off.
3. Conclusion:
The isodesmic approach is not magic and it relies on the similarity of two compounds, one for which there are experimental data, causing similar computational issues. Under the right conditions it's a useful approach, whereas under other conditions -- where a body of experimental data exists -- it might just be easier to determine the correlation between experimental and calculated data via fitting.
The approach worked better for the acetate/propanoate pair than the formate/acetate pair -- and one would consider acetic acid and propanoic acid to be more similar than formic acid and the higher acids. We're still far off from obtaining a perfect result though.
An additional problem is obviously the sensitivity of pKa to the DG -- one pH unit is about 1.36 kcal/mol, which is very small given the usual errors in DFT level calculations. I've seen indications online (google!) that the accuracy of b3lyp is about 3 kcal/mol, and one can always debate the accuracy of a highly empirical method like COSMO.
Hiç yorum yok:
Yorum Gönder